Hot Rolled Coil

BlueScope's range of Hot Rolled Coil products consists of many grade variations to accommodate specific strength, ductility, weldability, bendability and galvanising requirements for many applications, ranging from structural sections to tubing, tanks, furniture components, hot water systems, racking and shelving.

Hot Rolled Coil is available in a range of analysis, structural and formable products with custom thicknesses, widths and length options. Mill edge or trimmed edge, pickled and oiled conditions are also available.

Manufactured by BlueScope, Hot Rolled Coil conforms to Australian Standard AS/NZS 1594:2002.

For other product and technical information, please refer to the relevant datasheet.

Structural products provide guaranteed minimum strength levels, excellent weldability and are recommended for galvanising applications.

Structural Grades Thickness (mm) Width (mm)
HA200 1.5 - 12.7 750 - 1250
1475 - 1550
HA250 1.5 - 12.7 1150 - 1250
1475 - 1550
HA250 Floorplate 2.1 - 8.0 1200 & 1500
HA300 1.6 - 8.0 900 - 1240
1475 - 1550
HU300 3.0 - 12.7 1150 - 1240
1475 - 1550
HA350 1.6 - 8.0 1150 - 1240
1475 - 1550

Analysis products are low to medium carbon level steel grades, offering a wide range of properties for manufacturers. Typically, the low carbon grades offer excellent formability and weldability, while the medium grades are used in wear and abrasion applications.  All products are typically supplied as Hot Rolled Coil, with a mill edge, and, depending on grade and size, they may be supplied as trimmed edge.

Analysis Grades Thickness (mm) Width (mm)
HA1006 1.5 - 12.7 750 -1250
1475 - 1550
HA1010 1.6 -12.7 1150 - 1250
1475 - 1550
HA1016 1.6 - 12.7 900 - 1240
1475 - 1550
XK15B28 2.0 - 8.0 800 - 900
HK1042 4.0 - 8.0 1350 - 1450

Note XK15B28 is a BlueScope grade and is not part of AS/NZS 1594:2002.

Formable products are designed to suit a series of bending, drawing and pressing levels, from moderate to severe, with some grades containing guaranteed minimum yield strengths.

Formable Grades Thickness (mm) Width (mm)
HA1 1.6 - 12.7 750 - 1250
1475 - 1550
HA3 1.6 - 6.0 750 - 1250
1475 - 1550
XTRAFORM® steel 400 1.6 - 6.0 By Enquiry
XTRAFORM® steel 500 2.49 - 6.0 By Enquiry

Note that not all grades are available in all thickness width combinations.  Please check with BlueScope to determine availability. Hot Rolled Coil with weathering resistant properties is also available in BlueScope's REDCOR® steel range of products.

The standard delivery condition is mill edge, but trimmed edge may be available on enquiry. Some products are also available as Pickled and Oiled or Pickled and Not Oiled.